ON TODAY'S SHOW
Welcome to Episode #061. Tonight we are going to talk about finishes for computer desks and project plans, whether to offer them or not. We are joined tonight by our guest host Shane Wright.
WHAT'S GOING ON IN OUR SHOP?
Drew - Updating plans for the website and gearing up for this weekend's desk build with my brother.
Jeremy - Finally have all the electrical done in the shop. Now it is time to start organizing.
Shane - I'm building another mountain man bird house for a friend
Do you find woodworking plans beneficial?
- Drew - I listen to a lot of podcasts and I have to say Todd is a freaking natural. I’m not sure if he's available long term, but if so, he would make an awesome third co-host.
- Lemongrovewoodgnome - This was a very informative episode. I am a Freud guy, and was in the market for a 40t blade. Instead of purchasing another Freud blade, I went ahead and purchased the CMT 40t blade (214.040.10) that was mentioned in the show. Can’t wait to test it out.
- Hey, Jeremy. Wanted to touch base with you regarding some of your comments on your podcast. First let me welcome you to SC. You may not remember a couple episodes I commented on a podcast and you all made fun of my nick name....TeeQueTwo (Golf, Que Ball and my dad is how i came up with this nickname. I know go by TeeQue)
Anyway, I digress. I live up here in Columbia SC and wanted to let you know there is a store called Mann Tool. They are on I26 and Chris Drive. They have lots of turning supplies, inventory of lumber from blanks, flat and natural edge along with other things you need for your shop. I would like to invite you up this weekend if you are available this Saturday November 5th. We have Carl Jacobson coming to our turning club and would like to have you as a guest. You then can see the store too.
Also, regarding your domino I am interested in purchasing for my upcoming 2 table build and barn door build. I have been looking at them for this build but cannot fathom paying full price if i could find one used.
- Brian McCauley - Just listened to a recent episode. Don't spend the cash on DMT plates for the ES3000. This works amazingly well. http://www.mccauleysdesign.com/diy-diamond-discs-for-worksharp-ws3000
Workshop has given us another Workshop 3000 to giveaway. You can find the link for giveaway at http://www.countrysideworkshop.com/giveaway
If you would like to support the show you can head over to https://www.woodshop101podcast.com/listen find the show notes for today’s episode and there will be links for small one time donations as well as links for recurring donations.
I would like to remind you if you listen to the show on iTunes to please give us a 5 star rating. It helps us reach a greater audience. Like McIntyre Furniture said "I'm new to your podcast. I tuned in because my woodworking friend Todd Clippinger was a guest host for a few episodes. He is always full of great info. I'll continue to listen to this woodworking podcast now that I know about it."
If you listen to us on another medium, please stop by our YouTube Channel and subscribe. We are keeping track of our subscribers because once we reach a certain milestone we will be partnering with different companies to bring you all some great things.
HOW CAN YOU FIND OUT MORE ABOUT SHANE WRIGHT!
HOW CAN YOU REACH US?
You can send us an email at email@example.com
Our Facebook is https://www.facebook.com/woodshop101podcast
Twitter : @Woodshop101pod
Instagram : https://www.instagram.com/woodshop101podcast/
YouTube Channel: https://www.youtube.com/channel/UCojHQH2cOt2w7dMRxEnBDkw
You can call our Skype name and leave us a voicemail at woodshop101podcast or give us a call on our voicemail line (409) 234-3959.